Structured cabling for modern offices

From a few new drops to complex, multi-floor build-outs. A dedicated project manager and an experienced install team run the job from walkthrough to sign-off.

  • 15+ years of cabling in South Florida
  • A dedicated project manager on every job
  • Small adds to complex build-outs
  • Cabling, network and phones from one team

Get a cabling quote

What’s the job?

The short answer

What is structured cabling?

Structured cabling is the organized wiring behind an office network. Each cable runs from a central patch panel in the network closet to a jack where a desk phone, computer, printer or Wi-Fi access point plugs in. Meretech installs Cat5 and Cat6 voice and data cabling, drops, patch panels and low-voltage wiring for offices in Miami-Dade, Broward and Palm Beach, and sets up the phones that run on it.

The problem

When the wiring is an afterthought

  • The build-out is almost done and nobody planned where the phones and computers plug in.

  • The phone company blames the cabling and the cabling contractor blames the phone company.

  • The network closet is a knot of cables and nobody knows which one goes to the front desk.

  • New hires sit where there is no jack, so the fix is a long cable taped across the floor.

  • You are moving offices and the phones have to work the day you open.

  • On a big build-out, the low-voltage work gets squeezed between the electrician and the drywall crew.

How we set it up

What we install

Small adds, whole floors and new construction, planned and run by one project manager and our install team.

  • A dedicated project manager

    One Meretech project manager owns your job: scopes it, builds the schedule with your general contractor and the other trades, is your single point of contact, and walks the finished work with you before sign-off.

  • An experienced install team

    The same crew handles a few new drops in an open office and a complex multi-floor build-out on a construction schedule, with 15+ years of South Florida buildings behind them.

  • Voice and data cabling

    Cable runs for desk phones, computers, printers and Wi-Fi access points, from one central point to every place that needs a connection.

  • Cat5 and Cat6 runs

    Cat6 handles higher network speeds and is the usual choice for new work. We also add to existing Cat5 networks.

  • Drops and patch panels

    A drop is one cable run ending at a wall jack. Every drop comes back to a patch panel, so moving a desk later means changing a patch cord, not pulling new cable.

  • Low-voltage wiring

    The low-voltage work an office needs alongside its data cabling. Tell us what the space needs and we tell you what we cover.

  • Network switching and security

    The switches your drops plug into and the security settings on your network, set up by our IT team.

    IT services
  • Phones on the new cabling

    Our cloud business phone systems run on the network we wire, so the phones go in with the cable.

    Business phone systems

Network rooms we’ve wired

Photos from our own jobs, from a single wall cabinet to a full network room.

Row of black network racks with blue patch cables in an office network room
A network room with four racks
Two-post racks with cable managers and an overhead ladder carrying bundled cable
Racks and overhead cable ladder
Bundled blue data cable on a tray above a drop ceiling
Cable run through the ceiling
Rack with patch panels and neatly managed blue patch cables
Patch panels with managed cable
Wall-mounted network cabinet with a switch and patch panel
Wall cabinet for a small office

Before you switch

Planning cabling for an office move or build-out

Floor rack in an office network closet with patch panels, switches and a monitor
An office network closet we wired.
When should cabling go in during a build-out?

Before the walls close. Running cable through open framing and ceilings is faster and cleaner than fishing it through finished drywall later. Bring us in once the floor plan is set and before the drywall goes up.

Have a rough count ready: desks, phones, printers, Wi-Fi access points and where the network closet will be. A patch panel makes it easy to move a desk later, as long as there is a drop nearby. A few spare drops in conference rooms and open areas cost far less now than after move-in.

Cat5 or Cat6?

Both carry phone calls and computer data. Cat6 is built for higher network speeds and less interference, so it is what most new office work uses. Plenty of older offices in Miami-Dade, Broward and Palm Beach still run on Cat5, and it carries phones fine.

If you are adding drops to an existing office, we look at what is there first. Sometimes matching the old cable makes sense. Sometimes the better move is to run Cat6 for the new drops and plan to replace the rest when you can.

Cabling in South Florida office buildings

Many office buildings here use the space above the drop ceiling as the return air for the AC. Cable that runs through that space has to be plenum-rated (CMP), which gives off less smoke in a fire. Riser-rated cable (CMR) is for runs between floors. We look at the ceiling before we quote, because the cable type changes the job.

Older buildings with concrete block walls are another local detail. Fishing cable inside block is slow and sometimes impossible, so drops on those walls usually run in a surface raceway painted to match. Tell us the building and the year it went up, and we tell you what to expect.

Side by side

One company for cabling and phones, or two?

ComparedMeretech: cabling and phonesSeparate cabling and phone vendors
When a phone stops workingOne team that ran the cable and installed the phoneTwo companies, and each may point to the other
Planning the dropsPlanned around where the phones and network gear will goCabling planned without the phone setup in mind
Move-in dayCabling, network and phones on one scheduleYou coordinate two schedules
After move-inUnlimited support on your phone service from the same teamThe cabling contractor is done when the job ends
Typical setups. Every job depends on the building and the scope.

Switching

How we run a cabling project

  1. Walkthrough

    We walk the space

    The floor plan, the ceiling, the network closet and every place that needs a connection. On new construction, we meet your general contractor.

  2. Before work starts

    Scope, quote and schedule

    How many drops, where they go, what the job costs and when each phase happens, on paper before we start.

  3. Install

    We run the cable

    Cat5 or Cat6 runs from the patch panel to each jack, scheduled around the other trades so the walls close on time.

  4. Sign-off

    Handoff and go-live

    We walk the finished job with you, then set up your network and phones on the new cabling.

Questions about office cabling

What are the 6 components of structured cabling?

The TIA-568 standard splits it into six parts: the entrance facility where outside service comes into the building, the equipment room, backbone cabling between rooms or floors, the telecommunications room (your network closet), horizontal cabling out to each desk, and the work area where devices plug in. In a small office, several of these can share one closet.

How much does structured cabling cost?

It depends mostly on how many drops you need. Cable type, the length of each run, ceiling access and the building itself also change the price. Tell us the address and how many connections you need, and we quote the job.

Can you wire our new office before we move in?

Yes. We run the voice and data cabling in the new space and set up your phone system on it, so the move is planned by one team. The earlier we see the floor plan, the easier it is to put drops where people will actually sit.

Can you add a few drops to the office we already have?

Yes. Tell us where you need new connections and what is in your network closet now. If the existing wiring is Cat5, we tell you whether to match it or run Cat6 for the new drops.

Do you do cabling in Broward and Palm Beach too?

Yes. We work across Miami-Dade, Broward and Palm Beach, from Homestead to Jupiter, including Fort Lauderdale, Boca Raton and West Palm Beach.

Get a quote for your office cabling

Tell us the address and roughly how many connections you need. A Meretech specialist calls you within one business day to go over the space.

Rather talk to sales?(305) 390-2787

Build your plan

How many people need a phone?

What do you need most?